• Search by Printer
  • Register
  • Wishlist (0)
  • Recently viewed products
  • Compare products list
You have no items in your shopping cart.
Tripp Lite N785-H01-SFP-D network media converter 1000 Mbit/s Multi-mode, Single-mode Black1
Tripp Lite N785-H01-SFP-D network media converter 1000 Mbit/s Multi-mode, Single-mode Black1
Tripp Lite N785-H01-SFP-D network media converter 1000 Mbit/s Multi-mode, Single-mode Black2
Tripp Lite N785-H01-SFP-D network media converter 1000 Mbit/s Multi-mode, Single-mode Black3
Tripp Lite N785-H01-SFP-D network media converter 1000 Mbit/s Multi-mode, Single-mode Black4
Tripp Lite N785-H01-SFP-D network media converter 1000 Mbit/s Multi-mode, Single-mode Black5
Tripp Lite N785-H01-SFP-D network media converter 1000 Mbit/s Multi-mode, Single-mode Black6

Tripp Lite N785-H01-SFP-D network media converter 1000 Mbit/s Multi-mode, Single-mode Black

Tripp Lite N785-H01-SFP-D. Maximum data transfer rate: 1000 Mbit/s, Networking standards: IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z, Ethernet interface type: Fast Ethernet, Gigabit Ethernet. Fiber optic connector: SFP, Connectivity technology: Wired. Fiber mode structure: Multi-mode, Single-mode. Product color: Black, Housing material: Metal, Country of origin: Taiwan. Input voltage: 20 - 57 V, Power consumption (typical): 5.5 W
Manufacturer: Tripp Lite
SKU: 6464345
Manufacturer part number: N785-H01-SFP-D
Vendor: Synnex
MSRP: $251.80
$167.19
Ship to
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options
Customize a Network Connection Extension over Fiber Optic Cable This network media converter works with a variety of SFP transceivers to convert a copper Gigabit Ethernet signal to fiber optic and extend it to a second network device. The customizable SFP port supports both singlemode and multimode transceivers, allowing your network connection to reach hubs, switches and other devices located farther away than copper cabling’s 100-meter limit. Auto-negotiation and automatic MDI/MDI-X configuration seamlessly connect devices without crossover cabling. Monitor Your Installation with Line Loop Back Determine the health of your network connection via the Line Loop Back (LLB) function, which ensures copper and fiber cables have been correctly installed. Use the DIP switches to control each function or turn them on or off. LEDs Indicate Installation Performance and Diagnostic Functions Easy-to-read LEDs on the side of the unit indicate essential status information, including network speed and connection, LFS diagnostics and unit power. The included 20–57VDC terminal block provides primary and secondary power inputs. Protective Metal Housing Built to Withstand a Variety of Hazards The hardened aluminum case is designed to operate in extreme temperatures ranging from -10 to 60 degrees Celsius (14 to 140 degrees Fahrenheit). It is protected from electrostatic discharge (ESD), radio frequency interference (RFI) and power surges. Hardware is included for DIN mounting. TAA-Compliant for GSA Schedule Purchases The N785-H01-SFP-D is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

 

  • Customizable converter extends up to 1000 Mbps (1 Gbps) of data via open SFP port
  • Automatic MDI/MDI-X configuration connects devices without crossover cabling
  • Hardened aluminum housing withstands operating temperature range of -10° to 60°C
  • Primary and redundant power supply ports allow connection of dual DC power sources
  • Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases
Customize a Network Connection Extension over Fiber Optic Cable This network media converter works with a variety of SFP transceivers to convert a copper Gigabit Ethernet signal to fiber optic and extend it to a second network device. The customizable SFP port supports both singlemode and multimode transceivers, allowing your network connection to reach hubs, switches and other devices located farther away than copper cabling’s 100-meter limit. Auto-negotiation and automatic MDI/MDI-X configuration seamlessly connect devices without crossover cabling. Monitor Your Installation with Line Loop Back Determine the health of your network connection via the Line Loop Back (LLB) function, which ensures copper and fiber cables have been correctly installed. Use the DIP switches to control each function or turn them on or off. LEDs Indicate Installation Performance and Diagnostic Functions Easy-to-read LEDs on the side of the unit indicate essential status information, including network speed and connection, LFS diagnostics and unit power. The included 20–57VDC terminal block provides primary and secondary power inputs. Protective Metal Housing Built to Withstand a Variety of Hazards The hardened aluminum case is designed to operate in extreme temperatures ranging from -10 to 60 degrees Celsius (14 to 140 degrees Fahrenheit). It is protected from electrostatic discharge (ESD), radio frequency interference (RFI) and power surges. Hardware is included for DIN mounting. TAA-Compliant for GSA Schedule Purchases The N785-H01-SFP-D is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

 

  • Customizable converter extends up to 1000 Mbps (1 Gbps) of data via open SFP port
  • Automatic MDI/MDI-X configuration connects devices without crossover cabling
  • Hardened aluminum housing withstands operating temperature range of -10° to 60°C
  • Primary and redundant power supply ports allow connection of dual DC power sources
  • Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases

Products specifications

Attribute nameAttribute value
Width4.57"
Weight14.8 oz
Master (outer) case length15.1"
Master (outer) case width13.1"
Master (outer) case height10.2"
Terminal block includedY
Country of OriginTaiwan
Depth3.94"
Height1.97"
Housing MaterialMetal
Quick installation guideY
Wavelength-division multiplexing (WDM)Y
Master (outer) case GTIN (EAN/UPC)10037332268577
Master (outer) case weight15.4 lbs
Technical details
Product colorBlack
Packaging data
Package width9.17"
Package depth7.2"
Package height2.44"
Package weight21.2 oz
Ports & interfaces
Ethernet LAN (RJ-45) ports1
Connectivity technologyWired
Design
CertificationCE, FCC, RoHS
InternalN
DIN rail mountingY
Operational conditions
Operating temperature (T-T)-10 - 60 °C
Storage temperature (T-T)-40 - 85 °C
Operating relative humidity (H-H)10 - 95 %
Storage relative humidity (H-H)5 - 95 %
Power
Input voltage20 - 57 V
Power consumption (typical)5.5 W
Features
Fiber mode structureMulti-mode, Single-mode
LED indicatorsY
Packaging content
AC adapter includedY
Performance
Networking standardsIEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Maximum data transfer rate1000 Mbit/s
Fiber optic connectorSFP
Auto MDI/MDI-XY
Fiber ports quantity1
Logistics data
Quantity per master (outer) case10 pc(s)
Network
Cable types supportedCat5, Cat5e, Cat6, Fiber
Ethernet interface typeFast Ethernet, Gigabit Ethernet
Ethernet LAN data rates10,100,1000 Mbit/s
Auto-negotiationY
*
*
*

Products specifications

Attribute nameAttribute value
Width4.57"
Weight14.8 oz
Master (outer) case length15.1"
Master (outer) case width13.1"
Master (outer) case height10.2"
Terminal block includedY
Country of OriginTaiwan
Depth3.94"
Height1.97"
Housing MaterialMetal
Quick installation guideY
Wavelength-division multiplexing (WDM)Y
Master (outer) case GTIN (EAN/UPC)10037332268577
Master (outer) case weight15.4 lbs
Technical details
Product colorBlack
Packaging data
Package width9.17"
Package depth7.2"
Package height2.44"
Package weight21.2 oz
Ports & interfaces
Ethernet LAN (RJ-45) ports1
Connectivity technologyWired
Design
CertificationCE, FCC, RoHS
InternalN
DIN rail mountingY
Operational conditions
Operating temperature (T-T)-10 - 60 °C
Storage temperature (T-T)-40 - 85 °C
Operating relative humidity (H-H)10 - 95 %
Storage relative humidity (H-H)5 - 95 %
Power
Input voltage20 - 57 V
Power consumption (typical)5.5 W
Features
Fiber mode structureMulti-mode, Single-mode
LED indicatorsY
Packaging content
AC adapter includedY
Performance
Networking standardsIEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Maximum data transfer rate1000 Mbit/s
Fiber optic connectorSFP
Auto MDI/MDI-XY
Fiber ports quantity1
Logistics data
Quantity per master (outer) case10 pc(s)
Network
Cable types supportedCat5, Cat5e, Cat6, Fiber
Ethernet interface typeFast Ethernet, Gigabit Ethernet
Ethernet LAN data rates10,100,1000 Mbit/s
Auto-negotiationY

Product tags

  • (90642)
/* Added for Digitol */ /* End Added for Digitol */